Have you ever wanted to add a little bit of Sunday service to your album? With the Graceful Theme Pack and the Cross Punch, you can create enchanting and elegant faith scrapbook projects that will add a bit of your devotion to any layout or album. Check out these examples!
To create these projects, you’ll need:
- Graceful Theme Pack or (Shop Canada | Shop Australia)
- Cross Punch or (Shop Canada | Shop Australia)
- Custom Cutting System with Oval Patterns or (Shop Canada | Shop Australia)
- Custom Cutting System with Circle Patterns or (Shop Canada | Shop Australia)
- 12-inch Trimmer or (Shop Canada | Shop Australia)
- 12-inch Trimmer Straight Blade or (Shop Canada | Shop Australia)
- 12-inch Trimmer Scoring Blade or (Shop Canada | Shop Australia)
- Tape Runner or (Shop Canada | Shop Australia)
- Repositionable Tape Runner Refill or (Shop Canada | Shop Australia)
- All-Purpose Scissors or (Shop Canada | Shop Australia)
- Foam Squares or (Shop Canada | Shop Australia)
Choose Faith Border
Step 1: Cut a 12″ x 3″ strip of charcoal patterned paper for the base. Cut a 12” x 2-1/2” strip of wood paneled paper and adhere to the base.
Step 2: Cut a 12″ x 1/2″ strip of olive branches paper and adhere to the border. Cut a 12″ x 1-3/4″ strip of gingham paper and mount on the border as shown.
Step 3: Punch six crosses with wood paneled paper and four crosses with charcoal patterned paper. Mount on the left and right sides of the border as shown.
Step 4: Add stickers to the middle of the border.
Trust in the Unknown Border
Step 1: Cut a 12″ x 3-1/8″ strip of gingham paper for the base. Cut an 11-5/8″ x 2-3/4″ strip of wood panel (olive branches) paper and mount it on the base.
Step 2: Cut a 11-1/4″ x 2-3/8″ strip of olive branches (wood panel) paper and also with beige cardstock. Mount the beige cardstock underneath to make the patterned strip sturdier. Punch five crosses from the strip at regular intervals. Tip: Punch the middle cross first. From the middle, measure 2-1/4″ and 4-1/2″ from both sides and punch. Apply foam squares liberally on the back and mount on the border.
Step 3: Add stickers as desired.
Thankful and Blessed Card
Step 1: Create the card base. Cut an 8-1/2″ x 5-1/2″ piece of beige cardstock. Using the 12-inch Trimmer and the Scoring Blade, score along the long edge at 4-1/4″ and fold in half.
Step 2: Cut a 4″ x 5-1/4″ piece of wood panel paper. Lightly tack the piece onto the front of the card. Open the card and place on cutting mat. Using the inside of the second-largest oval pattern and the Green Blade, placed on the lower right section of the card, cut an oval from the layered pieces. Remove the wood paneled piece, position the same oval pattern over the hole just cut and cut again, this time using the Red Blade. Reapply adhesive and mount on the card.
Step 3: Cut a 3-1/8″ x 1″ strip of gingham paper. Using scissors, make a V notch in one end. Adhere to the border and top with stickers.
Step 4: Cut a 4-1/4″ x 3-1/8″ piece of olive branches paper and adhere it to the inside of the card. Cut a 4-1/4″ x 1/4″ strip of wood panel paper and tuck it just behind the top edge. Punch crosses from wood panel, gingham and charcoal patterned papers. Apply Foam Squares to the charcoal cross and mount it so it’s in the middle of the oval cutout. Adhere the others, along with a sticker, to the inside edge as shown.
Which one of these faith scrapbook projects do you like the most? Let us know in the comments below!